HappyModel Mobula6 HD 1S 65mm Brushless FPV Drone BNF FrSky-FpvFaster

HappyModel Mobula6 HD V2 1S 65mm Brushless FPV Analog Drone

$189.00
Save $76

Quantity

Featured Products

TBS Crossfire Diversity Nano RX

$82.00

RadioMaster Bandit ExpressLRS 915MHz ELRS RF 1W Module TX

$149.00 $176.00

SUNLU ASA 3D Printer Filament 1.75mm 1KG

$37.00 $41.00

SUNLU PETG 3D Printer Filament 1.75mm 1KG

$25.00

RadioMaster Bandit BR3 ExpressLRS 915MHz ELRS TCXO Receiver

$44.00

RadioMaster TX16S Mark II Max Radio Controller Transmitter

$428.00 $464.00

Happymodel Mobula6 HD V2 1S 65mm Brushless FPV Analog Drone BNF FrSky

Features:

AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX

Extreme light 1S 65mm Brushless HD whoop only 27g

Come with Runcam Split3-lite 1080P HD DVR

Smooth and agile

Compatible for 1S Lipo/LIHV

Camera Angle adjustable

Specifications:

Brand Name: Happymodel

Item Name: Mobula6 HD 1S 65mm Brushless whoop HD drone BNF version
Wheelbase: 65mm
Size: 80mm*80mm*40mm

Weight: 27g

Receiver option:

Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)

Spare parts specifications:

Motor	Mode: EX0802 19000KV Configuration:9N12P Stator Diameter:8mm Stator Length:2mm Shaft Diameter: Φ1mm Motor Dimension(Dia.Len):Φ10.5mm14.9mm Weight(g):1.7g No.of Cells(Lipo):1S only
Propellers	Gemfan 1219-3 Center Thickness:5mm Prop Disk Diameter:31mm Center Hole Inner diameter:1.0mm Weight:0.28g
Flight controller	(Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC Built-in voltage detection
Onboard 4in1 ESC	MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600
Onboard Frsky SPI D8 receiver Version	SPI BUS receiver Frsky D8 compatible Compatible Non-EU transmitter D8 model Channels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
Onboard 5.8g VTX	Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band Smart audio ready
Runcam Nano3	Model: RunCam Split3-Lite Field of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3) Video Resolution:1080@60fps/1080@50fps/1080@30fps/720@60fps Video File Format: MOV Image Resolution:2 MP TV Mode: NTSC (720480)/PAL (720576) Switchable Interface: JST 1.25mm / UART and SH 1.0mm Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III) Hole Distance of Installation: 25.525.5mm PCB Size: 2929mm Lens Module Size: 14*14mm Lens Specs: M9 Power Input: DC 5-20V(Non-direct power supply from the battery. Powered directly with the battery will generate surges and burn the camera.) Working Current: 450mA @5V
Lipo Battery	Capacity:250mAh Voltage:3.8v Continuous Discharge Rate: 30C Size: 55mmx12mmx7mm Weight: 6.5g Connector: PH2.0

Package includes:

Item Name	Qty
Mobula6 1S 65mm whoop Drone Frame	1
SPI Receiver Option1: Crazybee F4 Lite FC built-in Frsky SPI D8 RX	1
EX0802 KV19000 brushless motor	4
Gemfan 1219-3 Propellers(4cw+4ccw)	1
Runcam Split3-lite 1080P HD Camera +DVR	1
5.8G 25mw 40ch VTX (Flight controller built-in)	1
1S 300mah 30C LiHV Battery	4
1S Lipo/LIHV USB Charger	1
Propeller disassemble tool	1